Table 358: Show Multicast Rpf Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Output Fields
show multicast rpf show multicast rpf
2702
®
OS for EX Series Ethernet Switches, Release 10.4
Table 358 on page 2702 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 358: show multicast rpf Output Fields

Field Name
Instance
Source prefix
Protocol
Interface
Neighbor
user@host> show multicast rpf
Multicast RPF table: inet.0, 12 entries
0.0.0.0/0
Protocol: Static
10.255.14.132/32
Protocol: Direct
Interface: lo0.0
10.255.245.91/32
Protocol: IS-IS
Interface: so-1/1/1.0
Neighbor: 192.168.195.21
127.0.0.1/32
Inactive172.16.0.0/12
Protocol: Static
Interface: fxp0.0
Neighbor: 192.168.14.254
192.168.0.0/16
Protocol: Static
Interface: fxp0.0
Neighbor: 192.168.14.254
192.168.14.0/24
Protocol: Direct
Interface: fxp0.0
192.168.14.132/32
Protocol: Local
192.168.195.20/30
Protocol: Direct
Interface: so-1/1/1.0
Field Description
Name of the routing instance. (Displayed when multicast is
configured within a routing instance.)
Prefix and length of the source as it exists in the multicast forwarding
table.
How the route was learned.
Upstream RPF interface.
Upstream RPF neighbor.
command.
show multicast rpf
Copyright © 2010, Juniper Networks, Inc.