Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1304

Complete Software Guide for Junos
1200
®
OS for EX Series Ethernet Switches, Release 10.4
Resolving mastership...
Complete. The other routing engine becomes the master.
ISSU: RE switchover Done
ISSU: Upgrading Old Master RE
WARNING: A reboot is required to install the software
WARNING: Use the 'request system reboot' command immediately
ISSU: Old Master Upgrade Done
ISSU: IDLE
Shutdown NOW!
[pid 2635]
*** FINAL System shutdown message from user@switch ***
System going down IMMEDIATELY
NOTE: If you omit the
the original master Routing Engine with the
command for the upgrade to complete.
Log in after the reboot completes. To verify that both Routing Engines have been
5.
upgraded, enter the following command:
{backup}
user@switch> show version invoke-on all-routing-engines
re0:
------------------------------------------------------------------
Hostname: switch
Model: ex8208
JUNOS Base OS boot [10.4-20100826.0]
JUNOS Base OS Software Suite [10.4-20100826.0]
JUNOS Kernel Software Suite [10.4-20100826.0]
JUNOS Crypto Software Suite [10.4-20100826.0]
JUNOS Online Documentation [10.4-20100826.0]
JUNOS Enterprise Software Suite [10.4-20100826.0]
LC JUNOS Installation Software [10.4-20100826.0]
JUNOS Routing Software Suite [10.4-20100826.0]
JUNOS Web Management [10.4-20100826.0]
re1:
------------------------------------------------------------------
Hostname: switch
Model: ex8208
JUNOS Base OS boot [10.4-20100826.0]
JUNOS Base OS Software Suite [10.4-20100826.0]
JUNOS Kernel Software Suite [10.4-20100826.0]
JUNOS Crypto Software Suite [10.4-20100826.0]
JUNOS Online Documentation [10.4-20100826.0]
JUNOS Enterprise Software Suite [10.4-20100826.0]
LC JUNOS Installation Software [10.4-20100826.0]
JUNOS Routing Software Suite [10.4-20100826.0]
JUNOS Web Management [10.4-20100826.0]
To verify that the line cards that were online before the upgrade are online after the
6.
upgrade, log in to the master Routing Engine and enter the
command:
nonstop-upgrade
option in this step, you must manually reboot
reboot
request system reboot
Copyright © 2010, Juniper Networks, Inc.
show chassis