7.2 Troubleshooting fault symptoms
Fault symptoms described in this manual
This manual describes how to troubleshoot the following fault symptoms:
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
•
No LEDs are lit on the controller on page 348
•
Start-up failure on page 351
•
Problem releasing the robot brakes on page 355
•
Problem starting or connecting the FlexPendant on page 358
•
Problem using the joystick on page 362
•
Controller fails to start on page 363
•
Reflashing firmware failure on page 364
•
Inconsistent path accuracy on page 365
•
Controller is overheated on page 367
© Copyright 2023-2023 ABB. All rights reserved.
7 Troubleshooting
7.2 Troubleshooting fault symptoms
Continues on next page
347