Replacing Parts On The Front Panel And Door; Replacing The Manipulator Signal Connector (Smb) - ABB OmniCore V250XT Type B Product Manual

5.3 Replacing parts on the front panel and door

5.3.1 Replacing the manipulator signal connector (SMB)

Location
The illustration shows the location of the manipulator signal connector.
xx2200001956
Required spare parts
Spare part
Harness SMB connection
Harness SMB link
Harness SMB link
Harness SMB link
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V250XT, rev 04 or later
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2023-2023 ABB. All rights reserved.
5.3.1 Replacing the manipulator signal connector (SMB)
Article number
3HAC081735-001
3HAC077440-001
3HAC077388-001
3HAC083231-001
Article number
-
-
Article number
3HAC074000-008
5 Repair
Note
Harness 1xSMB
Harness 1xSMB
Harness 2xSMB
LV
Note
Content is defined in section
Standard toolkit for controller on
page 426.
Note
Continues on next page
289