Chapter 11 Manage library resources on the instrument
11
Injection protocols library
Injection protocol settings
Setting
Application type
Dye set
Run module
Analysis settings
Size standard
284
Read-only setting that specifies Sequencing or Fragment analysis.
For information, see "Dye sets library"
For information, see "Run modules library"
You can specify up to 6 run modules for a plate. If you specify 6 run modules,
6 injections are added to the Run queue when you start a run.
For information, see "Analysis settings library"
For information, see "Size standards library"
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Description
on page
285.
on page
272.
on page
288.
on page
275.