Pre-Run Checks And Plate Alerts In An Automated Barcode Run; View Alert And Notification Details - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

• Starts the run for the first installed plate.
• Performs pre-run checks as described in "Processes that the instrument performs during a run"
page 144.
• Scans the barcode for the next plate loaded into the instrument, performs pre-run checks, then
adds the plate to the Run queue. Repeats this step for remaining plates.
IMPORTANT! If you open the drawer to add or remove plates, be very careful to remove only plates
that have already been run. If you load a different plate in the position of a plate that has not yet been
run, a Link plate error is generated, the instrument pauses, and all injections for the original plate are
cancelled.
After you load the correct original plate in the position, go to the Run Queue screen, select the
cancelled injections, then tap Add to queue.

Pre-run checks and plate alerts in an automated barcode run

In an automated barcode run, pre-run checks are performed when a plate file is linked to a plate
position. If pre-run checks do not pass, a
a plate position.
To display the reason for the alert, tap the
is displayed.
For more information, see "Plate alert troubleshooting (automated barcode workflow)"

View alert and notification details

1. If a plate alert symbol (
The number of notifications is listed with the alert symbol.
Notifications are saved for each user. After you view the notifications, the number of alerts is no
longer displayed. If a different user signs in, the number of alerts is displayed until the user views
the notifications.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
(Pre-run checks failed) symbol is displayed at the top of
!
symbol. A message screen that identifies the failed check
!
) is displayed for a plate position, tap
!
Chapter 6 Start and monitor a run

View alert and notification details

on page
.
!
6
on
509.
149