Connect the instrument directly to a computer
1. Perform a virus scan on the computer before connecting it to the instrument.
2. Connect a cable to the direct connection port on the instrument.
1
IMPORTANT!
default configuration of the ports is different and ports cannot be used interchangeably.
Direct connection port
1
3. Connect the other end of the cable to the
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Connect the instrument to a computer or network (hardware connections)
Ensure that you use the correct ports for direct connection (#2 in the figure). The
Chapter 14 Manage the software (instrument)
network port on the computer.
14
441