Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 38

Chapter 1 Product information
1
About the SeqStudio ™
Plate positions in the home screen
Plate position and status
1
Glowing border on a completed plate position.
2
Plate alerts
3
Run status
4
Plate injections
5
Screen element
Plate position and status
Glowing border
Plate alerts
Run status
Plate injections
38
Flex Series Instrument Software v1.0
1
See "Plate position status and plate run status"
Indicates that the plate run status is Completed.
• —Displays alert information about injection order changes, re-injections,
!
insufficient polymer, and other conditions. The number of alerts is indicated
above the symbol.
• —Displays alert information during an automated barcode workflow run that
!
pause the instrument and prevent the run from continuing.
For more information on plate alerts, see the following sections:
• "Pre-run check messages and plate alerts during a run"
• "Plate alert troubleshooting"
• "Plate alert troubleshooting (automated barcode workflow)"
See "Plate position status and plate run status"
The number of the currently running or completed injection and the total number of
injections for the plate.
SeqStudio
Time remaining or Estimated end time
6
Sample QC (or Spectral QC or Install QC) for the plate
7
Plate name
8
User name
9
Description
on page 507
™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
2
on page 39.
on page 146
on page 509
on page 39.
3
4
5
6
7
8
9