Table of Contents
Advertisement
Measurement Log
Measurement log is used to view and export
measurement results, including the measurement time,
date, and measurement details, etc. Click the detailed
information
of
each
measurement status, analysis time, concentration,
sample absorbance, measuring range and
information. When checking measurement records, you
can check based on time (including 1 week, 1 month, 3
months, 6 months, 1 year and all). Export measurement
records by authorized person only. When exporting, a
USB storage device needs to be connected to the
instrument.
Calibration Log
Calibration log is used to view and export calibration
results, including the time, date, and
information. Click each calibration information to view
detailed recording parameters, including the calibration
time, calibration range, slope, intercept, calibration
points, standard
calibration
absorbance, cell temperature and concentration unit.
When checking calibration records, you can check based
on time (including 1 week, 1 month, 3 months, 6 months,
1 year and all). Export calibration logs by authorized
person only. When exporting, a USB storage device is
required to be connected to the instrument.
Operation Log
Operation log is used to view and export instrument
operations. Relevant login and instrument operation
records can be viewed. Export operation logs by
authorized person only. When exporting, a USB storage
device is required to be connected to the instrument.
Settings
Settings include the Connectivity, Display, Files and Info
and Access Control. It is used to set up the connection
and display-related options (including basic options such
as Language, Time and Date, Unit Name, Temperature
Unit, Concentration Unit and Measurement Type), while
Files and Info provides the information of Instrument
Model, Serial Number, MIDB Firmware version and
8030cX Silica Analyzer
measurement
to
view
calibration
concentration,
Application version. Access control is used in login
interface, and is used for users with different permissions
to log in.
Connectivity
the
Connectivity is used to configure Ethernet; either DHCP or
Static IP can be selected. And an IP address is required if
other
Static IP is selected.
Display
Display is used to set Language, Date, Time, Unit Name,
Temperature Unit, Concentration Unit and Measurement
Type. As required, the different languages and date or time
need to set. After the Unit Name is set, the set unit name
will be displayed on the main interface. the Celsius or
Fahrenheit degree is for temperature unit. Concentration
Unit includes µg/L and ppb. Measurement Type includes Si,
SiO
and SiO
2
Language: It is used to select the language displayed on the
interface. English and Chinese are provided. Click "Save"
blank
and the instrument interface would switch to the selected
language.
Date: Date format can be set to MM/DD/YYYY, DD/
MM/YYYY and YYYY/MM/DD. When setting a month, date
and year, just select the month, day and year. Click "Save"
and instrument would switch to the setting date.
Time: Time format can be set to 12-hours system and 24-
hours system. If the 12-hours system is selected, hour,
minute, AM and PM are included; if the 24-hours system is
selected, then hour and minute are included. Click "Save"
and instrument would switch to the setting time.
Unit Name
It is used to set the name of the instrument. After the name
is changed, the set name will display at the instrument
name position on the main interface.
2-
.
3
System Running Chapter 5 | 33
Advertisement
Table of Contents
