Prepare the install run standard
For the instructions to prepare the standard, see the product information sheet. To find the product
information sheet, go to www.thermofisher.com, search for the product, then scroll to the bottom of
the product page.
Prepare the appropriate standard according to the procedure in the product information sheet.
Note: If you use the BigDye
v3.1 sequencing standards. For more information, see "Using BigDye
chemistry"
on page
Install check type
Sequencing
Sequencing for
MicroSEQ
™
ID
applications
Fragment
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
™
Direct Cycle Sequencing Kit, perform the install run with BigDye
312.
• Sequencing Standards, BigDye
• Sequencing Standards, BigDye
Sequencing Standards, BigDye
™
DS‑33 GeneScan
Standard v2.0 (Cat. No. 4376911)
Chapter 12 Run calibrations and install checks
Reagent
™
Terminator v1.1 (Cat. No. 4404314)
™
Terminator v3.1 (Cat. No. 4404312)
™
Terminator v1.1 (Cat. No. 4404314)
Installation Standards with GeneScan
Perform an install run
™
Direct Cycle Sequencing Kit
™
™
600 LIZ
Size
12
™
331