Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 39

(continued)
Screen element
Time remaining
Sample QC (or Spectral
QC or Install QC) for the
plate
Plate name
User name
Plate position status and plate run status
Status
Plate position status
Occupied
Available
Plate run status
In queue
Running
Analyzing
Exporting
Completed
Aborting/aborted
Cancelled
Paused
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Time remaining until all injections for the plate are completed. Changes to Estimated
end time if the injection order for the injection or the plate is moved to a later position
in the run queue. See "Use the Run queue to monitor a run on the instrument"
page 160.
See "Sample QC and quality alerts"
Plate name.
Name of the user who was signed in when the run was started.
The corresponding position in the instrument drawer contains a plate. These
positions are labeled as Link plate file in the instrument home screen.
The corresponding position in the instrument drawer is empty.
An injection is waiting to start. The injection will start based on the order of the
injection list displayed in the Run Queue screen.
Data collection for the injection is in process.
Data collection for the injection is complete, analysis is in process.
Result files are being sent to the Save location in the plate file.
Analysis and export is complete, results are available.
An injection with status of Running was cancelled.
An injection with status of In queue was cancelled.
The instrument was paused and the "pause immediately" option was selected.
The pause and cancel commands can be issued in the SeqStudio
Monitoring software or on the instrument.
Runs must be resumed on the instrument.
Chapter 1 Product information
About the SeqStudio ™ Flex Series Instrument Software v1.0
Description
on page 172.
Description
1
on
™
Flex Remote
39