Chapter 8 Use the Remote Monitoring software to monitor runs, view results, and use cloud analysis
Plate file requirements for viewing analyzed and cloud results
To view the analyzed data, a results report, or cloud analysis results in the Remote Monitoring software,
you must do the following:
• Create a plate file in the Plate Manager software (cloud) and enable cloud analysis. For information,
see "Set up cloud analysis in the Plate Manager software (cloud)"
• Link the plate file on the instrument and set the Save location field to Connect Platform before
you start the run. For information, see "Link a plate file and start a run"
If the Save location field in the plate file is not set to Connect Platform, you can still monitor the
run. However, the Export results report function is not available, and the Analyzed, Run history,
Cloud analysis tabs do not display information for the plate.
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Monitor a run from the Remote Monitoring software
on page
124.
on page
8
140.
187