Chapter 12 Run calibrations and install checks
12
Run a spectral calibration
Note: If data for a capillary is borrowed, it is listed in the
Example of Calibration QC with a borrowed capillary:
2. In the Run Details screen, tap the spectral calibration of interest.
The Spectral Calibration electropherogram screen is displayed.
The thumbnail pane is at the far left of the screen. Press-drag the pane to the right until the
calibration spectra are displayed.
318
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
(caution) category.