Manage The Network Configuration (Administrator Only) - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

Chapter 14 Manage the software (instrument)
14
Manage instrument settings
You are prompted to accept the End User License Agreement (EULA). After you accept, the
software update begins.
4. Power off, then power on the instrument. See "Power off or power on the instrument"

Manage the network configuration (administrator only)

For information on connections, see "Connect the instrument to a computer or network (hardware
connections)" on page
1. In the home screen, tap
The IP address for the instrument is automatically displayed for all current connections.
2. (Wireless or Wired connections only) To edit default network settings, tap Edit, or tap one of the
network settings fields.
3. (Wireless connections only) Edit the Wireless network settings.
a. Select a network that was automatically detected by the instrument.
b. Enter a password, if prompted.
c. Click Join.
d. Click OK when the authentication is completed.
4. (Wired connections only) Edit the Wired network settings.
a. Select DHCP or Static IP.
An IP address is automatically assigned if DHCP is selected.
464
439.
Actions4 Settings4Instrument4Network configuration.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
on page 485.