Export Consumables Log Files; Install Buffers (Wizard) - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

Export consumables log files

1. In the home screen, tap
2. Tap the log to export:
• Consumables install log—Exports a list of consumables installed, serial numbers, the name
of the signed in user at the time of install, and additional information. (If a consumable is
changed without signing in, no user name is displayed.)
Log format: InstrumentName_Consumable_Log_Date_Timestamp.csv
• Consumables usage log—Displays daily, weekly, monthly, and yearly statistics for number
and type of runs, number of plates, and number of polymer pouches and capillary arrays that
were installed on the instrument.
Log format: InstrumentName_UsageStatisticsReport_Date_Timestamp.pdf
3. Select the location for the export, then tap Next.
A message is displayed indicating that the file was exported. You can tap Details to view
information about the name and location of the exported file.

Install buffers (wizard)

IMPORTANT! Wear appropriate protection, including gloves, laboratory goggles, and coat whenever
you work with the fluids used on this instrument, or parts that may come into contact with these fluids.
IMPORTANT! Use only the parts listed in Appendix D, "Catalog numbers".
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Actions4Maintenance.
Chapter 13 Maintain the Instrument

Export consumables log files

13
363