Workflow: Create A Plate, Start And Monitor A Run, Then View Results - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

Chapter 2 Get started
2

Workflow: Create a plate, start and monitor a run, then view results

Workflow: Create a plate, start and monitor a run, then view
results
Create a plate file in the Plate Manager software and print the plate layout.
Prepare the instrument, prepare the samples and the plate, then load the
plate into the instrument.
Link a plate file located in the Inbox, on the instrument, on a network or
USB drive, or on Thermo Fisher
Set injection properties, then start the run.
62
Use the instrument
™
Connect.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide