Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 117

Note: All settings in the remaining steps will be assigned to all selected injection groups. If
different injection groups require different settings, repeat these steps for each injection group.
2. Specify the settings for the run using either of the following options.
For information on creating your own protocols and settings, see "Manage libraries"
• In the Injection protocol field, select a protocol.
An injection protocol contains the individual elements listed below. When you select an
injection protocol, these elements specified in the injection protocol are automatically
selected.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Chapter 5 Create a plate file in the Plate Manager software
5
Set up a plate file
on page 132.
117