Setting
Chemistry standard
Color, Dyes to calibrate,
Dyes used in samples,
Calibration peak order
Matrix condition number
upper limit
Locate start point after
scan, Locate start point
before scan
Limit scans to
Sensitivity
Minimum spectral QV
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
The standard for which you are creating the dye set: Sequencing Standard or Matrix
standard.
Displays the dyes and the peak order for the dye set.
Peak order is the order in which matrix standard peaks appear in the spectral
calibration electropherogram. "1" is the first peak to appear (shortest fragment, left-
most in the electropherogram), and so on.
For information, see "Spectral QV (quality value) and Condition number definitions and
limits"
on page
320.
Settings that determine peak detection.
For information, see "Spectral QV (quality value) and Condition number definitions and
limits"
on page 320
Chapter 11 Manage library resources on the instrument
Description
11
Dye sets library
287