Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 42

Chapter 1 Product information
1
About the SeqStudio ™
Option
Inbox
Note: Plate files are listed
alphabetically by name. Tap
Last modified to see the
newest plates added to the
Inbox.
Thermo Fisher ™ Connect
USB drive
IMPORTANT! Perform a virus
scan on a USB drive before
inserting it into a port on the
instrument.
Note: It can take up to 15
seconds for the instrument to
recognize a USB drive after the
drive is inserted in a USB port.
exFAT-formatted USB drives
are recommended.
Network drive
My Instrument
Create new plate file
About the Inbox on the instrument
The Inbox feature on the instrument allows you to send plate files from the Plate Manager software to
an instrument. Plate files that are sent to the Inbox on an instrument are also saved in the Plate files
library.
When you link a plate file, you can navigate to the Inbox to select the plate file (which lists only plate
files that have been sent to the instrument). This feature makes it easier and more convenient to locate
a plate file, instead of navigating to the My instrument location (which lists all plate files in the library).
Plate files are removed from the Inbox after they are run. Plate files remain in the library after they are
run.
42
Flex Series Instrument Software v1.0
Open a plate file that you created in the Plate Manager software and sent to the
instrument. See Chapter 5, "Create a plate file in the Plate Manager software".
For more information, see "About the Inbox on the instrument"
Open a plate file that you created in the Plate Manager software (cloud). This
option is displayed only if Thermo Fisher
• "Get started with the Plate Manager software (cloud)"
• "Enable or disable Thermo Fisher
(administrator only)"
Open a plate file in PSM or CSV format.
Note: To navigate up in the folder structure, tap
For more information, see "PSM and CSV plate files for import into the
instrument" on page
Open a plate file in PSM or CSV format.
• "Connect the instrument to a network drive (software)"
• "PSM and CSV plate files for import into the instrument"
Note: To navigate up in the folder structure, tap
Open an existing plate file from the Plate files library on the instrument.
Create a new plate file. See Chapter 4, "Create a plate file on the instrument".
SeqStudio
Description
™
™
Connect access on the instrument
on page 228
86.
™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
on page
Connect access is enabled. See:
on page 105
(Back).
on page 445
on page 86
(Back).
42.