Table of Contents
Advertisement
Chapter 1 Product information
1
About the SeqStudio
™
Hi‑Di
™
Formamide storage and usage
Formamide is an injection solvent that is used to prepare samples. It is not a consumable that is
installed on the instrument as are the other consumables listed in this section. It does not include an
RFID tag on the label.
Cat. No.
4401457
4440753
4311320
[1]
See the expiration date on the label. Do not use expired product.
About the SeqStudio
™
The SeqStudio
software that runs the SeqStudio
The software includes the following features:
• Complete workflow, from plate file setup to review of primary analysis results
• Intuitive display of sample quality, run notifications, and consumables status
• 4-plate capacity, with interactive plate loading during runs
• Ability to prioritize the order of injections and plates
• Automated barcode workflow with the internal barcode reader and optional user-supplied external
USB barcode reader
• Enhanced results accuracy with spectral autocalibration during every run
• Libraries to allow reuse of plate files, injection protocols, and other elements that are required to run
plates
• On-instrument learning aids and assistance:
– On-instrument tutorial videos with additional videos available on
– Demonstration mode that allows use of most features (see "Enable and set up Demo mode"
page
457)
– Step-by-step wizards for instrument maintenance procedures
– Smart help and remote session features to request and obtain assistance from Technical
Support (requires connection to Thermo Fisher
• Optional connection to Thermo Fisher
– Voice commands
– Remote plate file creation
– Data storage on the cloud
– Remote run monitoring from the cloud or a mobile device
– Automated cloud analysis with Thermo Fisher Scientific sequencing and fragment analysis
cloud apps
28
Flex Series Instrument Software v1.0
Description
5 mL
4 × 5 mL
If frequent sampling is required, dispense and freeze small aliquots
25 mL
™
Flex Series Instrument Software v1.0
Flex Series Instrument Software v1.0 is the on-instrument, integrated touchscreen
™
Flex Series Genetic Analyzer.
SeqStudio
–25°C to –15°C
™
of Hi‑Di
Formamide. To preserve quality, minimize freeze-thaw
cycles and exposure to air and room temperature. Use of Hi‑Di
Formamide after 8 freeze/thaw cycles has not been validated.
™
Connect)
™
Connect to access additional features:
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
[1]
Storage
www.thermofisher.com
™
on
Advertisement
Table of Contents
Troubleshooting
