Table of Contents
Advertisement
Chapter 5 Create a plate file in the Plate Manager software
5
Send a plate file to the Inbox on the instrument
4. Click Actions4Print plate layout.
A PDF file of the plate layout is downloaded.
Send a plate file to the Inbox on the instrument
If you do not send a plate file to an instrument when you save the plate file, you can send it from the
Recent plate files list in the Plate Manager software.
For information on the plate files that are accepted by Inbox, see "About the Inbox on the instrument"
on page
42.
1. Click
to display the home screen of the Plate Manager software.
2. At the far right of the Recent plate files list, place the cursor on a plate file in the Recent plate
files list.
3. Click
(Send to instrument).
Note: To cancel the Send to instrument command, click
instrument.
If a failed message is displayed, place the cursor over the message to display the reason. For
suggestions to address the issue, see "About the Inbox on the instrument"
126
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
(Actions)4Cancel send to
on page
42.
Advertisement
Table of Contents
Troubleshooting
