Table of Contents
Advertisement
Chapter 14 Manage the software (instrument)
14
Manage settings
4. In the SAE Mode screen, press-drag the slider to the Enable setting, then tap Next.
5. In the Server address field, enter the IP address of the computer on which the SAE Administrator
Console is installed. Do not change the Port or HTTPS settings.
IMPORTANT! Specify a server with a static IP address.
For more information, see "Determine the IP address for a computer on a network"
6. Tap Next.
456
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
on page
443.
Advertisement
Table of Contents
Troubleshooting
