Table of Contents
Advertisement
Chapter 5 Create a plate file in the Plate Manager software
5
Get started with the Plate Manager software (cloud)
(continued)
Screen element
Recent plate files list
(Copy & edit, in Recent plate files list)
(Send to instrument, in Recent plate files list)
(Actions, in Recent plate files list)
Connect Plate Manager software (cloud) to an instrument
When the Plate Manager software (cloud) is connected to an instrument, you can perform the following
tasks.
• Create plate files on the cloud
• Monitor instrument runs remotely from a computer or a smart device
The Plate Manager software (cloud) lists the instruments that are linked to your Thermofisher.com
account. If no instruments are listed, perform the following steps.
1. Ensure that Thermo Fisher
™
Fisher
Connect access on the instrument (administrator only)"
2. Link the instrument to your Thermofisher.com account. For information, see:
• "(Recommended) Link directly to your Thermofisher.com account"
• "Link a local profile to your Thermofisher.com account (one time)"
114
Lists the 10 most recently created or edited plate files
and their status. The status indicates if a plate file was
sent to an instrument. New plate files are added to
the top of the list. The oldest plate file is automatically
removed when a new plate file is added.
If a Failed to send status is shown, place the cursor over
the status to display the reason for the failure.
Makes a copy of the selected plate file with _Copy
appended to the plate name.
Allows you to select one or more instruments, then
sends the selected plate file to the Inbox on the
instrument(s).
Includes the following commands:
• Export (plate file)
• Remove from Recent Files
• Delete Permanently
• Cancel Send to Instrument
™
Connect is enabled on the instrument. See "Enable or disable Thermo
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Description
on page
228.
on page 217
on page 220
Advertisement
Table of Contents
Troubleshooting
