Get started with the Plate Manager software (cloud)
About the SeqStudio
Connect)
™
The SeqStudio
For a definition of formats and suggestions for when to use each format, see "PSM and CSV plate files
for import into the instrument"
Plate files can be run on the SeqStudio
Analyzer.
Note: The Plate Managersoftware does not include SAE functionality. If SAE mode is enabled for the
instrument, auditing for a plate file begins when it is linked or when it is imported into the Plate files
library.
SeqStudio
™
Flex and SeqStudio
™
If a SeqStudio
Thermofisher.com account, the Plate Manager software provides the following features:
• Create plate files on the cloud
• Monitor instrument runs remotely from a computer or a smart device
SeqStudio
™
Flex instruments
For the SeqStudio
features:
• Send plate files from the Plate Manager software to the Inbox on the instrument
• Set up automated cloud analysis
For more information
This guide provides information on using the SeqStudio
™
SeqStudio
Flex Series Genetic Analyzer.
For information on using the SeqStudio
Genetic Analyzer, see SeqStudio
MAN0018646 for v1.2 software or MAN0016138 for v1.1 software).
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
™
Plate Manager 2.0 Software (Thermo Fisher
Plate Manager 2.0 software is used to create plate files in PSM format or CSV format.
on page
™
Flex Series Genetic Analyzer or a SeqStudio
™
Flex Series Genetic Analyzer, the Plate Manager software provides these additional
™
™
Genetic Analyzer Instrument and Software User Guide (Pub. No.
Chapter 5 Create a plate file in the Plate Manager software
Get started with the Plate Manager software (cloud)
86.
Flex Series Genetic Analyzer or the SeqStudio
™
instruments
™
Genetic Analyzer is linked to your
™
Plate Manager 2.0 software with the
Plate Manager 2.0 software with the SeqStudio
5
™
™
Genetic
™
105