Connect The Instrument To A Network Drive (Software) - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

Connect the instrument to a network drive (software)

See your laboratory administrator for the information below that you need to connect to a network drive.
From any screen that displays the
to the drive.
IMPORTANT! Before connecting to a specific folder on a network drive, ensure that the folder is
shared (see "Create folders and enable network folder sharing"
1. Tap
Network drive in the Link Plate File screen or the Save location field in the Plate
Properties screen.
For information on how to display these screens, see the following sections:
• "Link a plate file and start a run"
• "Enter plate properties"
2. Tap the Destination field, tap the appropriate field to enter the IP address and the shared folder
name, then tap Done.
Note: Do not include the drive name in the drive location. For example, if you created folder
C:/Users/Your Name/SharedData, type IPaddress/Users/Your Name/SharedData, (do
not include C:/).
For more information, see "Determine the IP address for a computer on a network"
3. If required by your network, tap the appropriate fields to enter information in the Domain name,
User name, and Password fields.
4. Tap Connect.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Connect the software to a network drive (software settings)
Network drive option or the Save location field, you can connect
on page 140
on page 88
Chapter 14 Manage the software (instrument)
on page 444 ).
14
on page 443.
445