Table of Contents
Advertisement
Chapter 8 Use the Remote Monitoring software to monitor runs, view results, and use cloud analysis
2. (If you are using a SeqStudio
Plate Manager software home screen.
The Remote Monitoring software home screen is displayed. See "Parts of the Remote Monitoring
software home screen"
Note: (If you are using a SeqStudio
Software User Guide (Pub. No. MAN0018646 for v1.2 software or MAN0016138 for v1.1 software).
Open the Remote Monitoring software from the InstrumentConnect software
The InstrumentConnect main screen lists all instruments that are linked to your Thermofisher.com
account.
1. Sign in to apps.thermofisher.com. See "Sign in to apps.thermofisher.com and access the
InstrumentConnect software"
2. In the left pane, click
1
InstrumentConnect
1
Instrument status. Possible statuses are: Idle, Running, or UNKNOWN (the instrument has been idle for ≥24
2
hours).
Plate positions
3
• Plate positions are color-coded to reflect Sample QC. See "Sample QC and quality alerts"
• A
3. If no instruments are listed, perform the following steps. For information, see Chapter 9, "Use the
instrument with Thermo Fisher
a. Ensure that Thermo Fisher
b. Link the instrument to your Thermofisher.com account.
4. Click a SeqStudio
The Remote Monitoring main screen is displayed. See "Parts of the Remote Monitoring software
home screen"
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
™
Flex instrument) Click an instrument in the Monitor runs pane in the
on page
184.
on page
(InstrumentConnect).
2
(Warning) icon indicates that at least one well on the plate has a
™
Connect".
™
Connect is enabled on the instrument.
™
Flex instrument in the InstrumentConnect screen.
on page
184.
Monitor a run from the Remote Monitoring software
™
instrument) See SeqStudio
215.
™
Genetic Analyzer Instrument and
3
on page
Caution Sample QC status.
8
172.
183
Advertisement
Table of Contents
Troubleshooting
