Chapter 10 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.1 module
Signing an object when a regular run is started
Note: The Sign button is displayed only if your SAE account role has permission to sign objects.
If your system is configured to require a signature when you start a regular run (that is, not a calibration
or an install run), a message is displayed if any required objects have not been signed.
Tap View Details to show the pending signatures.
Each row corresponds to a required signature. If an item is listed two or more times, it indicates that
two or more signatures are required for the item. See the example at the end of this section for an
explanation of this screen.
The Object Name column lists the items that require signatures.
Object Name
A dye set name
An install run name
Tap a row in the pending signatures screen to display the Signature Requirement screen.
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
A plate name
Signing an object when a regular run is started
Description of the object
The most recent spectral calibration for the dye set specified
in the plate file.
The most recent install run for the application specified in
the plate file.
The plate file used for the run.
10
247