(continued)
Screen element
Create or open a plate file
(Switch instrument)
(Release notes)
(Settings)
Help
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Chapter 5 Create a plate file in the Plate Manager software
Get started with the Plate Manager software (cloud)
Allows you to do the following:
• Create a new plate file.
• Open a plate file (PSM file) that you created in the
Plate Manager software or on the instrument.
• Open a plate file (CSV file) that you downloaded
from the Plate Manager software or created in a
spreadsheet or text editor application.
Lists the instruments that are linked to your
Thermofisher.com account or your local profile.
™
SeqStudio
Flex Series Genetic Analyzer and
™
SeqStudio
Genetic Analyzer instrument types can be
listed.
For more information, see:
• "Connect Plate Manager software (cloud) to an
instrument"
on page 114
• "Plate position status and plate run status"
page 39
You can click an instrument to display the SeqStudio
Flex Remote Monitoring main screen. For more
information, see Chapter 6, "Start and monitor a run".
Change instrument type between SeqStudio
.
SeqStudio
™
The type of plate file you set up is determined by the
instrument type that is selected.
Displays release notes for the software.
Displays the selections for the default Save location for
plate files and accessing libraries.
Opens the software help system.
Description
™
Flex and
5
on
™
113