Chapter 9 Use the instrument with Thermo Fisher
9
Use voice commands
Note: A microphone icon is not displayed if you are signed in with a local profile.
2. Tap the gray disabled icon
During registration, the icon changes to the amber disabled icon
3–5 minutes.
The blue active icon
commands, and a person is detected by the proximity sensor.
Disable the voice command function
The voice command function can be disabled for individual users or for the instrument.
• To disable the voice command function for an individual user, tap the microphone icon to mute the
microphone. The muted microphone icon is shown below.
• To disable the voice command function for the instrument, disable access to Thermo Fisher
Connect. See "Enable or disable Thermo Fisher
only)"
on page
Use voice commands
1. Sign in with a cloud profile.
2. Ensure that the blue microphone icon
If the icon is displays a forward slash as shown below, the microphone is muted. Alexa cannot
accept commands when the microphone is muted. Tap the icon to unmute the microphone.
If the icon is gray as shown below, step in front of the proximity sensor on the front of the
instrument.
232
™
to start registration.
is displayed when the instrument is registered and ready to accept voice
228.
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Connect
™
Connect access on the instrument (administrator
is displayed at the top of the screen.
. Registration can take up to
™