Additional functions in the Plate Manager software
Load or download an example plate file
You can load an example plate file to use as a starting point for creating a new plate file.
You can download an example plate file if you are going to create a plate file in CSV format.
1. Click
to display the home screen of the Plate Manager software.
2. Click Create a plate file.
3. In the Properties tab, specify the number of wells, the application, and so on.
These settings determine the contents of the example plate file.
4. Click the Plate tab.
5. In the Injection Table section, click an option.
• Load—Displays a default plate file in the Plate tab. You can use the default settings as a
starting point to create a plate file. (You cannot update the settings for the default plate that is
loaded when you click Load.)
• Download—Saves a CSV file with default settings.
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Chapter 5 Create a plate file in the Plate Manager software
Additional functions in the Plate Manager software
5
127