Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 107

(continued)
Screen element
(Switch instrument)
(Release notes)
(Settings)
Help
Recent plate files list
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Chapter 5 Create a plate file in the Plate Manager software
Get started with the Plate Manager software (cloud)
Lists the instruments that are linked to your
Thermofisher.com account or your local profile.
™
SeqStudio Flex Series Genetic Analyzer and
™
SeqStudio Genetic Analyzer instrument types can be
listed.
For more information, see:
• "Connect Plate Manager software (cloud) to an
instrument" on page 114
• "Plate position status and plate run status"
page 39
You can click an instrument to display the SeqStudio
Flex Remote Monitoring main screen. For more
information, see Chapter 6, "Start and monitor a run".
Change instrument type between SeqStudio
.
SeqStudio ™
The type of plate file you set up is determined by the
instrument type that is selected.
Displays release notes for the software.
Displays the selections for the default Save location for
plate files and accessing libraries.
Opens the software help system.
Lists the 10 most recently created or edited plate files
and their status. The status indicates if a plate file was
sent to an instrument. New plate files are added to
the top of the list. The oldest plate file is automatically
removed when a new plate file is added.
If a Failed to send status is shown, place the cursor over
the status to display the reason for the failure.
Description
™ Flex and
5
on
™
107