Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 395

In this procedure, you fill capillary array covers with purified water (if you will store the capillary array),
replace the anode buffer container (ABC) with a waste ABC, and remove the capillary array from the
instrument.
1. Prepare for array storage: Fill an array tip cover and array electrode cover with purified water.
1
Figure 40 Array tip cover and electrode cover for the stored capillary array
Array tip cover
1
Electrode cover
2
2. Open the instrument, oven, and detection block doors.
Figure 41 Location of instrument, oven, and detection cell doors
Instrument doors
1
Oven door
2
Detection cell door (with oven door open)
3
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
2
1 1
Chapter 13 Maintain the Instrument
Maintenance wizard procedures
3 3
2 2
13
395