Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 208

Chapter 8 Use the Remote Monitoring software to monitor runs, view results, and use cloud analysis
8
Use cloud analysis in the Remote Monitoring software
If the cloud analysis settings in the plate file specify a new project, the project is created and
added to the list in the Cloud Analysis tab, and results are generated in the secondary analysis
application.
If the cloud analysis settings in the plate file specify an existing project, the following occurs:
• The project added to the list in the Cloud Analysis tab.
• All files in the project are analyzed with the cloud analysis settings in the plate file.
Note: If the plate file specifies the Quality Check (QC) module or the Peak Scanner
and no cloud analysis template is specified, the data is not reanalyzed. The results are
obtained from the data file.
2. Do any of the following as needed.
Task
Display the results of
the cloud analysis
Download reports for
the cloud analysis
Delete projects from the
list
Search for a project or a
plate
The files that are downloaded depend on the application.
Application type
Sequencing Quality Check (QC) module
208
Double-click a row.
The results for the project are displayed in the secondary analysis
application.
IMPORTANT!
If the project has not finished analyzing, do not make any
changes in the project.
For information on viewing results, click
Click (Download Reports) in a row to download one ZIP file, or select
up to 5 rows to download ZIP files. Repeat if you have more than 5 project
reports to download.
See the table below for the files that are downloaded for each application.
Select one or more rows, then click
The project list displays up to 50 projects. If a project is not displayed in the
list and has not been deleted from the project list, you can click
then enter text from the project or plate name to filter the list. For example,
if you type Fragment, only plates with an application type of fragment are
listed. You can also enter a date or text that is within a project or plate file
name.
To remove the filter from the list, delete the text in the search field.
Software
• Each ZIP file contains a QC PDF file and a Plate report
• Downloaded file format name:
• Report format names:
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Action
(Help) in the application.
(Delete).
Description
PDF file.
PlateName_QC_PLATE_Report_Date_Timestamp.zip.
PlateName_QC_Report_Date_Timestamp.pdf and
PlateName_PLATE_Report_Date_Timestamp.pdf
™
Software,
(Search),