Configure Consumables Usage And Warnings (Administrator Only) - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

• Direct connection IP address (not displayed if the instrument is not connected to the
computer)
• Firmware versions
2. (Optional) Tap EULA to display the end-user license agreement or tap Details to display additional
instrument information.

Configure consumables usage and warnings (administrator only)

The settings on the screen determine the following:
• Whether a warning message is displayed in the bottom right of the home screen when a
consumable is about to expire. See "Instrument conditions in the home screen"
• Whether a run can start if consumables are expired or have exceeded the on-instrument life.
1. In the home screen, tap
2. Configure the settings as needed, then tap Done.
IMPORTANT! Before allowing runs with expired consumables, see "Important notice regarding
use of consumables that exceed supported limits"
For more information, see:
• "Check consumables status"
• "Instrument consumables handling, usage limits, and expiration"
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
4Actions4Settings4Consumables warnings.
on page 66
Chapter 14 Manage the software (instrument)
on page 25.
on page 25
14
Manage settings
on page 40.
453