Connect The Software To A Network Drive (Software Settings); Determine The Ip Address For A Computer On A Network - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

Connect the software to a network drive (software settings)

Determine the IP address for a computer on a network

1. In the Windows
2. In the search field at the bottom of the pane, type command prompt, then press Enter.
3. At the command prompt, type ipconfig, then press Enter.
4. Note the IP address listed.
Note: The location and number of digits in your IP address may differ from the IPv4 Address
example shown below.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
™
desktop of the destination computer, click
Chapter 14 Manage the software (instrument)

Connect the software to a network drive (software settings)

.
14
443