Table of Contents
Advertisement
Chapter 8 Use the Remote Monitoring software to monitor runs, view results, and use cloud analysis
7. Select the name of a template with analysis settings that you created in the secondary analysis
software.
8. Click Set Up.
When you click Set Up, the secondary analysis project name is added to the Cloud Analysis tab and
analysis begins.
Access cloud analysis results from the Remote Monitoring software
A project is added to the project list in the Cloud Analysis tab at the following times:
• When a plate run is complete (all injections are complete)
• If a plate is run more than one time (including re-injections)
• When cloud analysis is specified in the Run History tab
• If a plate specifies injections for sequencing and fragment analysis: When all injections for an
application type are completed
If a project is not listed in the Cloud Analysis tab, see "Remote Monitoring software troubleshooting"
on page
505.
1. In the Remote Monitoring software, click the Cloud Analysis tab.
If
(Warning) is displayed for a project, place the cursor over the symbol to display the reason.
!
The project list contains only projects that are associated with plates that you run. Up to 50 of your
most recent projects are listed.
New projects are added to the top of the list. If the list contains 50 projects and a new project is
added, the oldest project is automatically removed.
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Use cloud analysis in the Remote Monitoring software
8
207
Advertisement
Table of Contents
Troubleshooting
