Plate retainer with one opening on side to allow barcode reading
1
Plate with septum
2
Plate base
3
4. Snap the plate retainer (cover) onto the plate base.
IMPORTANT! Ensure that the plate retainer is firmly snapped in place on top of the plate (see
"Prepare the plate assembly"
assembly can become jammed in the drawer.
5. Verify that the holes of the plate retainer and the septum are aligned. If the holes are not aligned,
take the assembly apart, then re-assemble.
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
on page
77). If the retainer is not snapped in place, the plate
Chapter 3 Prepare the samples
Prepare and assemble sample plates
1
2
3
3
81