Save A Plate File - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

3. (Optional) Under Additional settings, assign a File name convention and Results group to each
injection as needed.
• A file name convention determines the naming of results files.
The default sequencing file name convention appends WellID_SampleName_Timestamp
to the file name. The default fragment file name convention appends
WellID_SampleName_SampleType_Timestamp to the file name.
• A results group determines the organization of results files.
The default results group organizes and groups files by start run time. On the instrument,
results are not grouped into subfolders specified by the results group, but you can view results
by results group name.
For information on creating new file name conventions and results groups, see "Manage libraries"
on page 132.
4. Edit the following entries in the Injection Table as needed.
Click (Expand) to display more settings.
Note: You can use copy and paste or click-drag functions to fill the fields in the Injection Table.
For information, see "Keyboard shortcuts and examples"
• (Optional) Edit the entry in the Sample name field for each well (the default sample name is
well ID).
• (Optional) Define custom fields (see "Define custom fields"
• (Fragment analysis only) Select the Sample type for each well: Allelic ladder, Negative
control, Positive control, or Sample.
• (Sequencing only) Enter the Amplicon and Specimen type for each well.
5. Click Next.

Save a plate file

Two options are available when you save a plate file:
• Save the plate file to the specified location.
• Save the plate file to the specified location AND send it to the Inbox on one or more instruments.
For more information, see "About the Inbox on the instrument"
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Chapter 5 Create a plate file in the Plate Manager software
on page
on page
on page
Set up a plate file
121.
129).
42.
5
119