View Real-Time Results In The Run Queue Screen - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

Chapter 6 Start and monitor a run
6
Use the Run queue to monitor a run on the instrument
(continued)
Screen element
Injection controls
Note: Buttons are inactive
if more than 1 injection is
selected or if the action
is not applicable for the
injection.

View real-time results in the Run Queue screen

For more information on reviewing results, see:
• "View real-time results in the home screen"
• "View results for a completed run (Run history)"
• "Use the electropherogram screen"
• Chapter 7, "View results on the instrument"
1. In the home screen, tap
2. In the Run Queue screen, select an injection or a completed plate with one injection only, then tap
View Plate.
• If you select a running or completed injection, the raw or analyzed plot is displayed.
• If you select a completed plate with one injection, the plate view is displayed. (The Plate view
button is inactive if you select a plate with more than one injection. Select a single injection to
view more information.)
162
• Inject next—Moves the injection to the next position in the list to be injected. For
information, see "Change the injection list order"
• Edit & Re-inject—Tap to add re-injections to the run. If needed, change the run
settings. For information, see "Cancel or add injections or specify re-injections
in the Run Queue screen"
calibration or install run injection is selected or if more than one injection is
selected.
• Cancel injection—Stops the current injection or an in-queue injection. The
injection status after cancellation depends on when in the run the injection
was cancelled. See Injection status above. For information, see "Cancel or add
injections or specify re-injections in the Run Queue screen"
• Add to Queue—Active if you select a cancelled injection. Changes the status to
In queue. The button is inactive if a spectral calibration or install run injection is
selected.
on page 173
Run queue.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Description
on page 165. The button is inactive if a spectral
on page 153
on page 170
on page 163.
on page 165.