Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 398

Chapter 13 Maintain the Instrument
13
Maintenance wizard procedures
f. Tap Next to continue.
Change Polymer Type or Shut Down Instrument—Insert array port plug
In this procedure, you install a plug in the array port. This plug allows pump washing without a capillary
array installed.
1. Obtain the array port plug.
1
Figure 46 Obtain the array port plug
Obtain the array port plug in holder on pump block above the ABC
1
398
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide