2. Select a sample to investigate, then click the Analyzed tab.
Note: The Analyzed tab is blank if the analysis is not complete or if the results were not saved to
Thermo Fisher
3. Click View Options, then deselect all dyes except the size standard dye.
4. Ensure that all expected peaks are detected.
Example of a size standard electropherogram
The results show
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
™
Connect.
Sample QC status, SQ 0.86.
Appendix A Troubleshooting
Inspect the data—Troubleshooting procedures
A
479