Enter Sample Names, Sample Types, And Custom Fields - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

Enter sample names, sample types, and custom fields

After you tap the Sample name field in the Edit Injection Properties screen, the Edit Well Properties
screen is displayed.
Note: If you want to use the default settings for sample names (well ID), Sample type (sample), or
amplicon or specimen (blank) and do not need to add special fields, you can skip this step.
1. In the Edit Well Properties screen, tap an attribute in the left column, for example, Sample name.
2. Tap the checkbox next to one or more wells, or tap the checkbox next to Select all to batch edit.
3. Tap the entry field for the attribute (for example, Sample Name), enter the setting, then tap Enter.
4. Repeat for all entry fields for the attribute.
5. Repeat for each attribute in the left column, and enter or select the appropriate setting:
• (Sequencing only, not shown in the screen example above) Amplicon and Specimen—
Optional text that can be used by secondary analysis software.
• (Fragment analysis only) Panel—Optional text that can be used by secondary analysis
software.
• (Fragment analysis only) Sample type—Sample, Positive Control, Negative Control, or
Allelic Ladder.
• Custom fields 1–10—Text fields to include additional sample attributes or identifiers that can
be used in file name conventions or by secondary analysis applications.
6. Tap Done to close the Edit Well Properties screen, then tap Done again to close the Edit
Injection Properties screen.
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Chapter 4 Create a plate file on the instrument
Enter sample names, sample types, and custom fields
4
93