Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 254

Chapter 11 Manage library resources on the instrument
11
Overview of libraries
(continued)
Library
Run modules
Dye sets
Size standards
(fragment analysis only)
Analysis settings
File name conventions
Results groups
254
A run module contains the parameters that control the instrument
during data collection.
A dye set defines the number, dye color, and migration order of the dye
peaks in the sample.
A size standard defines the sizes of known fragments. It is used to
generate a standard curve. The standard curve is used to determine the
sizing of unknown samples.
Analysis settings define basecalling (sequencing) and sizing (fragment
analysis) parameters.
A file name convention specifies the naming convention for sample
data files.
If you do not specify a file name convention for a plate, the following
default file name conventions are used:
• Sequencing—Well_Sample_TimeStamp
• Fragment analysis—Well_Sample_SampleType_TimeStamp
A results group defines the folder name where sample data files are
stored.
If you do not specify a results group, the default results group is used:
StartRuntime.
SeqStudio ™
Description
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
For information,
see
page 272
page 285
page 275
page 288
page 278
page 301