Microphone Icon - Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual

(continued)
Step
4 A (or the position of interest). You can also say Drawer A,
Position A, or Plate A.
5 Inbox (or Cloud (Thermo Fisher
or .Instrument).
6 Say the file number of the plate file to link, then say Start run.
In the example below, you could say 4 to select Plate_115, then
say Start run.
You can also use the following voice commands to navigate
through the list before specifying the file number:
Page up, Page down, Scroll up, Scroll down, Go back.
Note: If you do not want to start the run, you can do any of the
following:
· Say the file number of the plate file to link, then say No.
·
After the plate file is linked but before the run starts, say
Cancel run, Cancel plate, or Unlink.
· Say Alexa, stop.

Microphone icon

Microphone icon states
(Blue)
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
Chapter 9 Use the instrument with Thermo Fisher
User command
™ Connect), USB, network drive,
indicators for voice commands
The microphone is ready to accept commands. Tap the icon to mute the
microphone.
The icon turns gray
™
Thermo Fisher
when a person is detected or Thermo Fisher
Instrument action and Alexa reply
The Link Plate File screen is
displayed.
From which plate source
do you want to select the
plate?
The Select Plate File screen is
displayed.
Select plate file. You can
say page up or page down.
Run is being initiated
now.
Pre-run checks are performed, then
the run starts.
Status of voice commands
if the proximity sensor does not detect a person or if
Connect access is interrupted. The icon turns blue again
™ Connect
Use voice commands
™ Connect access is restored.
9
235