Chapter 10 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.1 module
10
Functions that are not available when the SAE module is enabled
Functions that are not available when the SAE module is
enabled
The following instrument features are not available when the SAE module is enabled:
• Connection to Thermo Fisher
• Voice commands
• Plate Manager software (cloud)
• Sending a plate file from the Plate Manager software (cloud) to the inbox on an instrument
Note: If the instrument is directly connected by IP address to the computer that is running Plate
Manager software (desktop), you can send plate files to the Inbox on the instrument. See "Connect
the instrument to a computer or network (hardware connections)"
• SeqStudio
™
• Smart Help
• Save, export, or import objects (such as plate files or results) to or from Thermo Fisher
• Sign in to the instrument with a local profile or cloud profile (instead you sign in with an SAE
account)
Note: An administrator local profile can sign in to the instrument to access
4About and Actions4Settings>4SAE.
Enable SAE mode on the instrument and specify the SAE
server (administrator only)
Before you enable SAE mode, install the SAE Administrator Console on a computer with a static IP
address.
After you enable SAE mode, the instrument automatically restarts.
This procedure requires a local administrator profile and an SAE administrator account. For information
on creating SAE accounts, see SAE Administrator Console v2.1 User Guide for Capillary Electrophoresis
Products (Pub. No. MAN0025849).
1. Sign in to the instrument with a local administrator profile.
2. Ensure that there are no runs in progress and that no plate positions are linked.
3. Tap
Actions4Settings4SAE.
Note: The SAE button is not displayed in the Settings screen unless the function has been
enabled by a service representative.
240
™
Connect
Flex Remote Monitoring software
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
on page
439.
™
Connect
Actions4Settings>