Thermo Scientific appliedbiosystems SeqStudio Flex Series User Manual page 118

Chapter 5 Create a plate file in the Plate Manager software
5
Set up a plate file
• Select individual elements in the following fields. Selecting an individual element overrides an
injection protocol selection and clears the Injection protocol field.
– Application type if you are creating a mixed sequencing and fragment analysis plate
– Dye set
– Run module
Note: Run module 1 is used for the first injection you specify. To specify replicate
injections, see "Specify replicate injections (Add run module function)"
For more information, see "Run modules, read lengths, size ranges, and run times"
page
– Analysis settings
– Size standard (fragment analysis only)
Note: If you use the BigDye
dye set. For more information, see "Using BigDye
page 312.
The Injection Table is displayed for the selected injection.
118
526.
™
Direct Cycle Sequencing Kit , select Z_BigDye Direct for the
SeqStudio ™ Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
™
Direct Cycle Sequencing Kit chemistry"
on page 128.
on
on