Creating A Measurement File - Thermo Scientific RadEye GX Operating Instructions Manual

With button Start the measured value is read from the unit at a
certain polling interval. Use the scroll bar to define the polling
interval. You can select a value between 1 and 3600 seconds.
The dose rate can be displayed numerically and graphically. Click
on Graphics.... A diagram is displayed that gives a representation
of the count rate values versus the time.
The current measured value is added at the right-hand side, and
the diagram is shifted to the left. Up to 100 measured values can
be represented. The graduation of the ordinate is automatically
adjusted to the measured values supplied by the unit.
Figure 8-2: Measurement graphics
8.4.3

Creating a Measurement File

The actual measured values that are shown in the "Measurement"
display field can be stored in a measurement file.
RadEye GX, GX-L DB-074 E 8-5
Pi/Ff 14.09.2016