4
Using the TruNarc Admin Software
Synchronizing Data with the TruNarc Admin Software
When you synchronize (sync) data, all scan results that are stored in the
TruNarc analyzer are copied into the Admin software, where they are
displayed as rows of data.
Open the TruNarc Admin software.
1
Turn on the analyzer (see
2
page
Connect the analyzer to the computer with the USB cable (see
3
The Analyzer Detected screen appears. Click
4
The Admin software only asks about sync-ing data when it detects that the
analyzer contains scans that have not yet been sync-ed.
NOTE
Searching for Scan Results by Key Words
You can search for scan results by any word that appears in the display. The
display will change to show only rows that contain the search terms.
(2) Enter a word or a
phrase in the Search box
38
TruNarc User Guide
page
13).
(1) Click the down arrow
and select a category
12) and enter the laser activation code (see
Yes
to sync the data.
Click the Reset button to restore
all rows to the display area
page
10).
Thermo Scientific