Table of Contents
Advertisement
Chapter 2
Getting Started
2.1 Electrode Holder
Installation
The meter-attached electrode holder (Catalog Number
EB1700ARM) can be installed on either side of the meter.
Unpack the base plate and stand with electrode
holder from the meter box.
Turn the meter over, with the meter display facing
down, on a clean dry surface.
Identify the side of the meter that the holder will be
installed on and remove the screw between the
circles on that side of the meter.
Align the base plate of the holder with the circles on
the meter.
Replace the screw from step 3 to attach the base
plate to the meter.
Turn the meter over, with meter display facing up.
Insert the stand with electrode holder into the metal
post on the base plate.
Place the electrodes into the electrode holder. The
recommended electrode diameter for each slot is
shown on the holder.
Eutech EC 1720 Conductivity Meter
7
Advertisement
Table of Contents
