1 Safety
1.7.3 Hot parts may cause burns
1.7.3 Hot parts may cause burns
Description
During normal operation, many parts become hot. Touching these may cause
burns.
There is also a risk of fire if flammable materials are put on hot surfaces.
Safe handling
Always use your hand, at some distance, to feel if heat is radiating from the
potentially hot component before actually touching it.
Wait until the potentially hot component has cooled if it is to be removed or handled
in any other way.
The bleeder can be hot, up to 80 degrees.
Do not put anything on hot metal surfaces, e.g. paper or plastic.
30
Note
The drive parts in the cabinet can be hot.
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA